4 in 1 Fully Backlit Learning Remote and an IR Receiver w/Cable and Mounting Bracket for use with Intel CIR Motherboards
CIR Receiver (We are the exclusive providers of this product. There are no other CIR receivers available anywhere)
This is a professionally engineered, custom made IR board specifically developed to be used with Intel motherboards that are equipped with a CIR (Consumer Infrared Receiver) header. We are the only providers of CIR receivers anywhere. The board is connected to the motherboard with the cable provided and is ready to go. The boards size is so small (1 1/8” W x 1 1/8” L x 3/8” H) that it can be mounted almost anywhere with double stick tape. The mounting bracket provided can be mounted with double stick tape or you can use 4-40 screws into the threaded holes in the bracket. The bracket comes with the hardware needed to mount the CIR receiver to the bracket. Screws are not included to attach the bracket to your case since there are many possible mounting variations.
The sensor on the front of the board must be in the line of sight for the remote to operate. However, only a small hole of about 1/8” is necessary for the receiver to see the remote. As long as the black sensor on the receiver is in that hole you will be able to use your remote up to 30 feet from the receiver.
The red LED on the front of the board will only flash when installed on the latest Intel motherboards as the BIOS for these boards has been updated to control the Inteset CIR LED.
The unit has been tested extensively on boards running both Vista and Windows 7 operating systems. It will not work with XP.
This is a partial list of motherboards that have a CIR header and will work with this receiver and any R6 or MCE remote.
Most current Intel Extreme Series and Media Series motherboards including:
Intel Board Model #s: DB35DP, DG33TL, DX38BT, DX48BT2, DG45-(ID, FC), DP45-(FC,ID, SG), DX48BT2, D5400SX, DP55-(KG, SB, WG), DX58SO, DH57DD, DH61AG, DH77EB, DP67-(BA, BG, DE), DH67-(BL, BG, CF, CL, GD, VR), DX58-(OG, SO2), DX79-(SI, SR, TO), DZ68-(BC, DB, ZV), DZ77-(BH-55K, SL-50K, GA-70K, RE-75K)
Check out this article on Missing Remote: http://www.missingremote.com/review/intel-core-i5-2400s-and-bh67gd-micro-atx-motherboard. It describes the advantages of our CIR on Intel motherboards vs. using a USB version.
Here is a quote from the article:
"It has been said before, but bears repeating because of how useful the included Consumer Infrared (CIR) header is, putting it on the short list of favorite motherboard features alongside user configurable power LED behavior when in standby. Because the feature is not enabled by default in BIOS, it will need to be enabled after installing a CIR. Then after the Nuvoton (Winbond) drivers are installed it acts as a fully functional Microsoft eHome RC6 IR receiver. This not only frees up a USB port and allows for a cleaner install because the receiver can be mounted inside the chassis, but also includes a feature not supported by the standard USB receivers - wake from off (S5) and hibernate (S4) in addition to standby (S3)."
Back-Lit Remote
Inteset’s INT-412 Media Center Infrared Remote Control gives you ultimate control over your Windows Media Center PC! Using infrared (IR) technology, the remote control sends command information to our exclusive CIR receiver from up to 30 feet away. Certified for Vista and Windows 7, the Inteset INT-412 lets you navigate through your media library, and control PC digital entertainment as easily as if you were sitting at your desk, and you can do it from the comfort of your sofa!
One of the best features of this remote is the full back lighting. This is the only back lit MCE Remote in this price range on the market today. Back lighting adds great enjoyment to your Media Center application as you can clearly see the buttons on the remote without the lights on in the room. Just look at the pictures above with the back lighting on and off. It adds a lot to the experience. So, microwave some popcorn, sit back and watch your TV and or computer using this great remote.
The other great feature of the remote is it's ability to learn the button commands for three devices in addition to your MCE computer. It is very simple to program each button. Complete instructions are provided.
Features
· Microsoft Windows Vista and Windows 7 Certification and Green Button support
· 48 button Fully Backlit 4 in 1 Learning Remote
· Includes all of the buttons and functions necessary for Microsoft certification,
including the official Green Button.
· Small CIR internal receiver with a custom cable and mounting bracket for your motherboard
CIR header
· Uses Intel drivers found at the Intel Download site for your motherboard.
· Protocol: RC6 IR Protocol. Guaranteed to work with our CIR Receiver.
Specifications:
|
Model
|
INT-412 (Back Lit Remote for use with our Custom CIR)
|
|
Color
|
Black
|
|
Buttons
|
48
|
|
Wireless Technology
|
Infrared
|
|
Batteries
|
AAA battery x 2
|
|
Remote Dimensions
|
8”L x 2”W x 1”H
|
|
Internal Receiver Dimensions
|
1 1/8”L x 1 1/8”W x 3/8”H (Does not include cable)
|
|
Internal Receiver Cable
|
16” (Cable only-Black)
|
|
What’s in the Box
|
Remote, Internal CIR Receiver, Cable, Mounting Bracket, Batteries, User Guide
|
You are buying a brand new R6 IR Remote and Internal Custom CIR Receiver with a Cable and a custom made mounting bracket. You will have to download the motherboard driver for this unit. It is free on Intel's site or on the CD that comes with your motherboard. The one you want is the Winbond or Nuvoton driver at the Intel Download Center depending on your motherboard. After you download the driver you must activate it in your BIOS.
CIR User Manual (pdf)
4 in 1 Backlit Users Guide (pdf)
